Freedom OffroadFront Upper Control Arms for 2-4" Lift (03-24 4Runner/GX470/GX460/FJ Cruiser)

Absolutely awesome UCA’s! I’ve spent double on others that were not this nice in quality. I highly recommend these to anyone needing new control arms for their Toyota!

I have an 07 FJ Cruiser and it was time to replace my upper control arms. My FJ lifted 2" with 33" tires and since I lifted it, the steering seemed a little loose and wanted to wander with uneven sections in the road. After doing some research, I found out that lifting an independent front suspension vehicle changes the geometry of the suspension so that it can not get the correct amount of caster during an alignment. This accounts for the wandering feeling.These UCA's correct the geometry so the suspension can be aligned correctly. After I installed these UCA's and took it in for an alignment, my caster went from 2.5 positive caster to 4.7 positive caster. This took care of the wandering.The installation was super easy and everything fit up exactly. It took me about 3 hours to install both sides. One tip for FJ Cruiser installation, on the driver side, remove the battery and battery plate to remove the UCA bolt.As for value, I looked at stock OEM UCA's and they were around $500 for a set and did not correct for my lift. So, $400is a bargain. These things are super beefy too, much heavier duty than stock. They are not uni-balls. You can replace the ball joints and the ball joints have grease fitting as well.I've read that they work just as good on Tacomas too, pretty much the same suspension.I would definitely recommend for a lifted FJ. I don't know about FJ's that are stock height.

Well built, quality and a Perfect fit on my vehicle

I haven’t had any issues with these and I’ve had them a few months now. The install was pretty easy as well. I’ve been off-roading as well since I’ve had them and still no issues.

I've had these on for a week. When I picked them up very surprisingly how heavy they were. Very stout. Impressive

Pros : Right out of the box these are a well built upper control arms! I’m confident in there construction and know they will hold up to any bashing I will put them through. For the price they are a no brainer.So why not 5 stars? Look at the included photos. I bought this car for my son and as it’s an 04 I wanted to completely rebuild the suspension bushings and all. While I was at it decided to put a lift on it. I bought a complete front end control arm and bushing kit to install with a lift kit. You’ll note in the one photo the angle of the oem ball joint is just maxed out. That and the camber was way off. This made me more than a little uncomfortable and as a result I knew I needed to replace the upper control arms. After looking at $600+ control arms I landed on these. They advertise that they will work on lifts up to 3 inches. If you look at the photo you’ll notice that ball joint is still almost maxed out. These control arms did however correct my camber/alignment situation. If I had done a 2 inch lift I would give this product a five stars. But seen as the ball joint angle on a 3 inch lift is still a too extreme for my liking they get four stars.If you’re going with a 2 inch lift or just leveling the car out I highly recommend these control arms. If you’re going with a full 3 inch lift I would recommend something else.Update; I have been out to Death Valley 2 times since installing these arms. As expected they have taken some aggressive off roading with flying colors. I still stand by my initial review but want to give credit where credit is due. These are well made UCAs.

These are great tubular upper control arms! Wanted some clearance for my new 2.5" Swayaway coilovers and these did just that. I was not expecting that these would also get rid of the front end shimmy at freeway speed and the benefit of solid handling on turns! Also the pivot bushings are nice and beefy just like the ball joints, have owned many Toyota trucks with all different expensive off road suspension parts and the quality of Freedom Off Road is just as good if not better than others! Price wise is a no brainier and the noise and low maintenance is the added bonus for me! Installing these in my garage was a breeze and just a tip, torque them when the tires are on the ground with the weight of your truck is on the suspension! You will not be disappointed if buying them.

Bought these for my 5th gen 4Runner after hearing so many complaints with spc arms. They’re a really nice product and had a perfect alignment when paired with a bilstein 6112 2.5” lift. Caster and camber were already in factory spec, only had to adjust toe from the lift.