rackchoice4U Rackmount Server Chassis with 3x5.25 Front Bays+7x3.5 +3x2.5 Drive Bays

I wanted to move my desktop computer to my homelab server rack to save space. Rails are coming tonight so it's not installed yet but I did confirm it fits fine in standard 3u slot.There weren't many options for server case that would fit a full atx mobo and a full sized atx psu. As per the pictures they all fit with no issues. Hard drive cage can be removed easily if you have a longer graphics card (it's about 16 inches of space and my card is 11 inches. I always go with noctua fans and toss out any case fans.All the screws come with it except cage nuts (which i have a million of anyway).I had to get a lower profile cpu fan/heatsink. The one pictured is be quiet pore rock slim 2. My old one was 6.5 inches and there is roughly 6.25 inches clearance from cpu to the case cover. Find a cpu heatsink under 6 inches.The pcie power cord does fit but just barely with the lid on. I'm worried it will put slight downward pressure on the graphics card over time so I have a 90 degree adapter coming tomorrow (just search 90 degree pcie adapter and there are some 10-15 dollar options).It's very solid and a bit heavier than I expected. Not a pro or a con necesarily. When I tried to install without rails it was heavy enough to make it hard to manage. Def need some server rails with the weight of this tank.Not much else to say. Its a solid case and doesn't break the bank.

great case to mod. its very large and has enough room to do what you want. very sturdy even cut up. however i do suggest rails cause fully built it weighs a TON lol

Everything fits in it pretty well, tons of space! I think the measurements for motherboard placement are a smidge off because it was a little too snug for my liking around the rear IO and slotting expansion cards was a challenge. I was afraid I was going to break them trying to put them in but they eventually went in. Could also just be my motherboard (Gigabyte C246M). But after installation it’s a very study enclosure.

Overall, this is a great case, The build quality is solid, and the layout is good. The case has plenty of capacity for drives, and the cages are easy to remove to add more. The filters will keep dust from building up as much on the interior, which translates to better cooling. The only shortfall for me was the fan. If you are placing this in a data center rack, the fan noise won't be an issue. It is for me though, since I'm using the computer in a rack with audio recording gear. I replaced the stock fan with a Noctua NF-P12 (Amazon B07CG2PGY6). Now it's very quiet and doesn't cause issues when recording. It's four and a half stars for me, but five stars for anyone not needing low noise.

This is a very nice server case, I have a few in a 27U rack!

If you don't care about how much it weighs, then this case is for you. Everything about the frame is incredibly sturdy. All the metal feels very solid and the tolerances are good on it too, everything fits together well. Additionally, it only takes up the 4u of rack space that it claims to. The depth is a bit short, but the height fit a full size desktop tower cooler that I use to use in an old PC with a hair to spare.

Can't return so leaving a review to feel better. Barely outside of the return window. Got a much better case, just stuck forever with this one. Probably will go out shooting with it.

This is a great case to build in, i appreciate the ability remove the uneeded drive cages in leu of longer pcie cards.Only con for the case is the front usb is non functional out of the box. Tested the usb ports on the motherboard in a different case and they worked, therefore the fault must be in the case